How To Iron On Patches

Prepare the Fabric

Before you begin to apply the patch, wash and iron the fabric. A clean, wrinkle-free finish will help the patch adhere properly. It’s also important to note that iron-on backing works best on natural fabrics such as cotton or denim, or a polyester/cotton blend.

Applying the Patch: 8 Easy Steps

1. Set your iron to the appropriate heat setting for the type of fabric and the patch. We usually recommend medium-high, but this will vary depending on the fabric and type of patch you are applying. DO NOT use the steam setting, and be sure there’s no water in the iron.

2. Lay the garment on a solid, heat-resistant surface. Don’t use a padded ironing board, because it may not allow strong adhesion. Consider using a wooden cutting board or stone countertop as an alternative. Be sure to put a towel under the garment to protect the surface from heat.

3. Place the patch in the fabric in the proper position.

4. Place a piece of parchment paper or light press cloth over the patch.

5. Apply firm, consistent pressure – straight down – with the iron for about 30 to 35 seconds. Do not move the iron.

6. Allow the patch to cool for a minute or two, then remove the parchment or press cloth.

7. Turn the garment inside-out and repeat the process on the back side of the patch for about 30 seconds. Remember to apply constant, firm pressure.

8. Remove the iron and check gently to see if the backing has adhered securely to the garment. Let the patch cool down completely before handling further, to ensure the heat-set backing is secure. If necessary, repeat steps 4 through 7 to ensure secure adhesion.

Caring for Your Patched Item

Proper care of your patched item will help the patch last as long as possible. Follow these simple steps to ensure a long patch life:
1）Wait 48 hours before washing the garment to ensure the heat seal is fully set. We recommend hand-washing.
2）To protect both the patch and your garment, turn it inside-out when washing.
We recommend washing in cold water.
3）Avoid washing the item in hot water or putting it in the dryer.
4）If needed, iron the patched area on a low heat setting, and always use a press cloth.
5）If you want to ensure a permanent installation, you can always sew on your patch.
There you have it! Now you know how to iron on your new patches in no time at all. See? We told you it was easy.

Nice customize is a manufacturer of custom patches online.It make creators can produce unique custom patches for all various of clothes.These patches just requires fewer MOQ(minimum order quantity) and lower price. No matter what you are stand for company,cafe, motorcycle club,fire department,clothing brand or military unit; we will provide you with professional customized patches, now contact us or create your product onlione.